Home/Products/Fine Chemicals/Polytetramethylene Ether Glycol
Polytetramethylene Ether Glycol 2018-03-30T06:46:33+00:00

Polytetramethylene Ether Glycol | CAS 24979-97-3

Polytetramethylene Ether Glycol 24979-97-3

Product Information of Polytetramethylene Ether Glycol (PTMEG)

  • CAS NO.: 24979-97-3
  • Molecular Formula: C6H16O3
  • Formula Weight: 136.18944
  • Synonyms: Polytetrahydrofuran; PTMEG; Tetramethyletherglycol; Furan,tetrahydro-,hoMopolyMer; POLYTTETRAMETHYLENEETHERGLYCOL; Poly(tetramethylene ether glycol) 650; Poly(tetramethylene ether glycol) 2900; THF homopolymer; Poly(tetramethylene oxide); PolyTHF

Properties of Polytetramethylene Ether Glycol (PTMEG)

Polytetramethylene Ether Glycol (PTMEG) is a white waxy solid. It turns into transparent liquid when the temperature is higher than room temperature. It dissolves easily in alcohols, esters, ketones, aromatic hydrocarbons and hydrocarbon chlorides. However, it does not dissolve in water or fatty hydrocarbons. When its molecular weight increases, its solubility drops. At room temperature, PTMEG is a good absorbent of water despending on its molecular weight and maximum up to 2%.

Uses of Polytetramethylene Ether Glycol (PTMEG)

Polytetramethylene Ether Glycol (PTMEG) is an important raw material for the production of polyurethane (such as PU fibers, polyurethane elastomer, synthesized leathers, paint additives, adhesives and sealants), polyesters and polyamides.

Storage and Transportation

Polytetramethylene Ether Glycol (PTMEG) should be stored in totally closed containers sealed with dry nitrogen. The containers must be fitted with heating equipment outside or inside to keep their internal temperature at about 50℃. Frozen PTMEG can be heated at about 70℃ for 24 hours to melt. PTMEG should not be stored at 90℃ for a long time.
In addition, it should be stored in cool, dry and well-ventilated places, and keep away from fire sources, sparks and naked flames. Due to PTMEG water absorbent and ease of oxidization, it should not be exposed to moisture or air. To avoid static electricity, its containers should be earthen during transportation.

PTMEG becomes highly combustible at high temperature. If fire is started, one could use spray water, alcohol foam, dry chemicals products or carbon dioxide fire extinguishers to put off the fire. When loading or unloading it, one should wear gloves and safety glasses to prevent contacting with the eyes or skin.

For more chemical products, you may contact us by sending email.